Industrial Range
Industrial Uniforms
Workwear built for the factory floor, the site and the warehouse. Heavy cotton drill and poly-cotton blends, bar-tacked at every stress point, cut for a full day of movement.
Overview
Built for industrial use
Industrial uniforms fail at the seams long before the fabric wears out. That is why every garment in this range is built around its stress points first — the crotch, the shoulder, the knee, the pocket mouth — and the cloth is chosen around the movement the job actually demands.
We cut industrial wear from heavier cloth than most uniform categories: typically 240–320 GSM cotton drill or a poly-cotton blend where abrasion resistance and quick drying matter more than pure breathability. Seams are double-needle lock-stitched, and bar-tacks are placed at every point that takes load.
Fit is deliberately generous through the shoulder and seat. A coverall that is cut slim looks better on a rail and fails within a month on a worker who spends the day crouching, reaching overhead and climbing. We size for the work.
Where visibility is a requirement, reflective tape is applied as a designed element rather than an afterthought — banded at the chest, cuff and shin so the wearer reads as a human outline in low light, not a scattering of bright patches.
Bar-tacked stress points
Every pocket mouth, fly and belt loop is bar-tacked, not just backstitched.
Double-needle seams
Lock-stitched main seams that resist opening under load and repeated washing.
Reflective banding
Tape applied to a consistent placement spec so a whole crew reads the same.
Action-back shoulders
Pleated back panel so overhead reach does not pull the garment out of shape.
Garments
What's in the range
Everything below is manufactured to the same specification standard. Mix garments freely within a single industrial order.
Coveralls & boiler suits
Single-piece, full-length zip or press-stud front, action back for shoulder movement.
Hi-vis jackets & vests
Reflective banding at chest, cuff and hem. Layered over or worn alone.
Work shirts & trousers
Two-piece sets with reinforced knees and multi-tool pockets.
Dungarees & bib overalls
Adjustable straps, chest bib pocket, generous seat and thigh.
Industrial aprons
Heavy drill or coated cloth for workshop, kitchen and processing lines.
Specification
- Fabric weight
- 240–320 GSM typical
- Reinforcement
- Bar-tacked stress points
- Visibility
- Reflective tape options
- Closure
- Metal or concealed zip, press stud
- Seams
- Double-needle lock stitch
- Colours
- Navy, khaki, grey, orange hi-vis
Size range
- Coveralls
- S – 5XL (chest 36"–58")
- Work shirts
- S – 4XL
- Work trousers
- Waist 28"–48"
- Hi-vis vests
- One size / S – 3XL
Sizes are graded to a single measurement set and held across reorders.
Customisation
- Company logo embroidered at chest, 45mm standard
- Name and role badges, sewn or hook-and-loop
- Department colour coding across a single site
- Reflective tape placement to your safety spec
- Pocket configuration built around the tools carried
Care guidance
- Industrial wash at 60°C is expected — fabrics are selected for it
- Do not bleach flame-resistant cloth; it degrades the finish
- Tumble dry low or line dry; high heat shortens tape life
- Wash hi-vis separately for the first two cycles
Industrial FAQ
Questions about this range
Yes. Send a sample garment and we will pattern from it, matching the cut, pocket layout and closure. We will confirm the fabric weight against what you send before cutting bulk.
We work with flame-resistant treated cotton. Tell us the standard you need to meet and we will confirm what we can source before you commit to an order.
To a written placement spec agreed before the bulk run — normally banded at chest, cuff and shin. The same spec is applied to every piece so a full crew is visually consistent.
Other ranges
Ordering industrial uniforms in bulk?
Request a quote